Here is an overview of the different tonometers used to measure IOP:
- Thumbs : (Don't panic, we're not going down that road again!) By gently palpating the orbs (ooh missus!) the experienced Ophthalmologist can detect differing IOPs between the two eyes.
- Schiötz : A purely mechanical device, now consigned to history with the sextant, the astrolabe and Windows 95. It doesn't require electricity, so it might be useful if you're holding a clinic in a tent, miles from civilisation. Normal location is in an eye hospital cupboard with other arcane items of long unused pieces of equipment (such as the big disc with concentric black and white rings on it.)
- Pneumatonometer : Only ever found at the opticians. It uses a small measured blast of air to obtain the reading, thus there is no contact with the cornea, and no risk of infection or abrasion. Of course, it means that patients who visit us screw their eyes up in anticipation of that puff of air!
- Goldmann : Applanation tonometer attached to a slit lamp. Uses a disposable plastic split prism, that, when pushed against a flourescein-stained eye, under a blue light, displays two offset green semi-circles. You turn the dial to move them into position, then read the pressure reading off the dial.
- Perkins : Like the Goldmann, only portable. Now superseded by :-
- Tonopen : It's new. It's totally portable - you can use it on all those patients who you can't get to the slit lamp. You hold it in your hand like a dart, and gently tap the patients eyeball, each time getting a little feedback click until it goes beep, and there's the reading. To prevent cross-infection, it comes with a supply of little rubber sheaths which you unroll over the tip of your magic wand ... okay okay, if they look like condoms, and they feel like condoms, then they are condoms - if you're a hobbit!
5 comments:
To make an umlaut over a lower-case O, you type & ouml ; (without the spaces) inline in the text. So, to type "Schiötz," you'd type
Schiötz
(You should see what a mess that is when I have to type it in HTML, since the & and the ; are "escape characters" and need to be specified with &--; whatevers themselves.)
Special Characters in HTML
Also, you can see my most recent blog entry (most of which won't apply to you) for a short blurb on making hyperlinks. That was some of the most complex HTML I've ever written!
Interobang beat me to it.
BTW, for the other Umlauts just
use a, or u instead of o. Works with the capital letters too,
Other useful combinatiuons are :-
After the ampersand, you write:-
#8482; = TM
reg; = R
copy; = Copyright
Thanks folks. Will Blogger recognise the ö as HTML code or will I just get Schiötz on my post. Consider this comment as a test.
Well the test seems to have worked.
I've done it! It works! And I've finally found a use for the preview function. I used it to check if it had worked before comitting the post to publication.
Once again thank you.
Post a Comment